Be a Franchise >>

How to Choose and Maintain a Boom Barrier Gate

Are you considering installing a boom barrier gate for your business, apartment, or parking lot?  Or if you already have one and want to ensure its long-term reliability? You are in the correct place! In this detailed instruction, we'll go over the major aspects to consider before repairing a boom barrier and provide practical advice for proper boom barrier maintenance. We'll also answer some of the most common user inquiries about boom barriers.

 

What does a Boom Barrier Gate mean?

You can locate them in toll Gates, parking lots, gated communities, industrial sites, and other locations. Their main responsibilities are to improve security, regulate traffic flow, and prevent unwanted access.

Selecting and installing a boom barrier is more than just selecting the first type you see online. To guarantee you receive the proper system for your needs, consider the following:

1. Objective and Location

Traffic Volume: Determine the number of vehicles passing each day. High-traffic locations require durable, quick-moving obstacles.

Environment: Is the location subjected to extreme weather, dust, or direct sunlight?  If so, select a weather-resistant model.

Space Availability: To determine the appropriate boom length, measure the entry/exit width.

2. Boom Barrier Types: Manual or Automatic

Materials: Aluminium is light and rust-proof, whereas steel provides strength; plastic may be appropriate for temporary or low-risk installations.

3. Power Supply and Backup

Electrical Requirements: Make sure a reliable power supply is available. Consider models with battery backup or solar solutions for essential places to reduce downtime due to power problems.

4. Access Control Integration: Will you support RFID, ANPR, card readers, or remote controls? Ensure that the barrier you select is appropriate for these systems.

5. Safety aspects

Sensors: Look for barriers equipped with safety sensors that detect cars or pedestrians, preventing mistaken closure.

Emergency Release: In the event of a loss of electricity, an emergency manual release is required.

6. Installation Surface and Foundation

Ground Condition: The surface should be flat and stable. In many cases, a stable installation requires concrete foundations.

Absorption: Maintain good drainage to avoid water gathering around the base, which can lead to rust or electrical problems.

7. Budget and Warranty

Initial cost compared to long-term value: A lower-cost barrier may require more repairs and downtime. Consider the overall cost of ownership.

Warranty and Support: Choose a manufacturer or supplier that offers a strong warranty and dependable after-sales service.

 

How to Properly Maintain a Boom Barrier Gate

Proper maintenance is the key to keeping your boom barrier working properly and increasing its service life. Here's a simple and effective maintenance plan:

1. Regular Inspections: Conduct periodic inspections to spot problems early on.

What To Check:

  • Barrier arm for dents, cracks, and misalignment.
  • Loose bolts, hinges, or bolts.
  • Check the control box and wiring for noticeable damage or breaks.

 

2. Cleaning: Clean the barrier arm and housing with a gentle cloth and a little soap once a month or as necessary.

Sensors should be gently cleaned with a soft brush or compressed air to maintain their quickness and accuracy.

To avoid rust and keep a professional look, remove any trash, sand, or bird droppings.

 

3. Lubrication: Apply lithium-based grease every three months to hinges, springs, and joints. Don't over-lubricate since excess grease collects dust.

Lubricate the motor per the manufacturer's instructions. Listen for strange noises or overheating, which could suggest lubrication or mechanical problems.

 

4. Testing and Calibration: Test the barrier's up/down movement daily. Ensure that it stops at the correct points and immediately reverses if prevented.

Safety features include regular testing of sensors and emergency release devices.

 

5. Tightening and Adjustments

Fixtures: To prevent loosening caused by vibration or weather changes, check and tighten all bolts and screws every month.

Springs: Inspect and adjust balance springs after every 30,000 cycles, or as directed by the manufacturer.

 

6. Professional Services

When to Call an Expert: If you detect any continuous electrical problems, sensor malfunctions, or mechanical failures that go beyond regular checkups, contact a skilled technician.

 

Why is boom barrier maintenance necessary?

  • Extended Lifetime: Well-maintained barriers can last up to 15 years, as opposed to only 5-10 years without regular care.
  • Reduces downtime: Early detection and repair avoid expensive breakdowns and delays.
  • Improves Safety: Prevents accidents and ensures following with safety regulations.
  • Reduces funds: Avoids costly emergency repairs and increases the lifespan of your investment.

 

User General Questions(FAQ): 

Q1: How regularly should you service your boom barrier gates?

To achieve the greatest results, perform visual inspections weekly, clean monthly, lubricate every three months, and arrange professional checks once a year.

 

Q2: What are the symptoms that my boom barrier requires maintenance?

A: Look for slow or stiff movement, odd noises, sensor failures, or the arm failing to stop in the exact place.

 

Q3: What if the barrier arm becomes stuck?

A: First, look for physical barriers or waste. If the problem continues, check for loose bolts or electrical faults. If you cannot address the issue, contact a professional technician.

 

Q4: How can I keep my boom barrier from rusting?

A: Regular cleaning, quick removal of dirt and fluids, and the application of anti-rust coatings to metal parts all help to prevent rust.

 

Q5: Can boom barriers withstand heavy weather?

A: Many models use weather-resistant materials and coatings. To achieve the greatest results, use a barrier rated for your local climate.

 

Installing and maintaining a boom barrier gate does not need to be difficult. By considering the proper factors before installation and following a simple maintenance plan, you can ensure that your barrier functions continually, safely, and efficiently for many years to come. If you have any special questions or require professional assistance, feel free to contact an authorized boom barrier supplier or service provider.

7 Reasons to Install an Automatic Sliding Gate at Home Fire Alarm Systems vs. Smoke Detectors: The Complete Guide for Homes & Businesses